Classical round pipe pull made of stainless steel.
Available diameters: 20, 25, 30, 35, 40 mm
Suitable for all MWE attachments.
All lengths available.

Download : TG.1100 Technical Drawing

Classical round pipe pull made of stainless steel.
Available diameters: 20, 25, 30, 35, 40 mm
Suitable for all MWE attachments.
All lengths available.

Download : TG.1101 Technical Drawing

Available grip diameters: 20, 25, 30, 35, 40 mm
Suitable for all MWE attachments.
All lengths available.

Download : TG.1007 Technical Drawing

This door pull comes in the same design as the ProTec sliding door system.

Standard center line is at 15.75" and standard height is 16.75".
Diameter of the grip : 1"
Further customization is possible on request.
Suitable for glass or wood doors.

Download : TG.1016 Technical Document

This door pull comes in the same design as the ProTec sliding door system.

Standard center line is at 15.75" and standard height is 16.75".
Diameter of the pull: 1"
Further customization is possible on request.
Suitable for glass or wood doors.

All lengths available.

Download : TG.1513.10 Technical Document

30x8mm profile.

Available in any length.

Download : Akzent Pull Technical Document

Flat profile made of solid stainless steel.
No visible fasteners.
Profile dimensions: 30x8 mm
Suitable for wood and glass doors.
All lengths available.

Available in all lengths. 

Download : TG.1512 Technical Drawing

Wood and solid Stainless Steel.

No visible fasteners. 
Wood dimensions: 30x30 mm
Brushed or Mirror polished. 
Suitable for all MWE attachments
All lengths available.

Download : TG.1526 Technical Document

Shown here in Wenge. Available in other species. 

Download : TG.1524 Technical Document

Total length 37 inches, CTC 24 inches.
The door pull is partly polished!
 

Download : TG.1137 Technical Drawing

MWE is completely capable and ready to engineer and produce whatever you can dream up. This is a pull designed by an architect and milled from solid stainless with a mirror polish.